VAG DPF for Android: Professional DPF & EGR Diagnostic Utility

WHAT INSIDE:


* VAG DPF Application (Android OS, version 4.44.15 Full)

DESCRIPTION:
With this application you can find out if the filter is really in the process of regeneration, if the regeneration is awaiting completion, how many kilometers have you traveled since the last regeneration, etc.

CORE FUNCTIONS:

* Display of 12 DPF filter parameters like soot mass accumulation in the filter, regeneration duration, km traveled and time passed since last regeneration, EGR valve closing, exhaust gas temperatures of the inlet, and outlet of DPF (Attention: data shown may vary depending on the engine type due to the presence of the parameters into the engine ECU)
* Manual or automatic parameters update
* Display, for all the parameters, of the previous value and the difference between the actual and the previous value (only for automatic update delays different from 0 seconds)
* Ability to exclude one or more parameter to increase the reading speed
* Display of the filter filling percentage before reaching the filling limit that starts the execution of a field regeneration (standard regeneration controlled by the engine ECU)
* Graphical display, using a progress bar, of the filling percentage value before starting a field regeneration or a service regeneration
* Graphical display of the filter status: red filter for the regeneration phase (passive, field, or service) of the grey filter with different back internal areas depending on the filling percentage value
* Display of extra data: adapter communication error counter, filter filling rating in µg/min, update time of all the 12 parameters, automatic update delay actually selected in the options menu
* Notification bar icon to show an active connection and the auto-update process running.




Need it? Push button Thanks, PM for pass | or by email right now

Attached Files

VAG DPF new.txt
File Type:
Downloaded:	0 times
Size:	34 bytes

SZ Viewer for Android: Suzuki ELM327 Diagnostic Software

DESCRIPTION:
A diagnostic application especially for Suzuki vehicles. SZ Viewer uses original protocols (via K-Line and CAN) instead of standard OBDII ones. It allows reading data and DTCs of almost all control modules (including extended Suzuki codes and historical errors).

Japanese domestic market (JDM) Suzuki cars are also supported, even if they do not support OBDII. ELM327 adapter (Bluetooth or WiFi) version 1.4 or later is required.

MANUFACTURER-SPECIFIC DIAGNOSTICS AND DTC READING
* Designed to read and clear diagnostic trouble codes (DTCs) across almost all internal control modules, including extended Suzuki-specific fault codes and historical error logs.
* Utilizes original manufacturer communication protocols via K-Line and CAN buses instead of restricted standard OBDII parameters.



Need it? Push button Thanks, PM for pass | or by email right now

Attached Files

Suzuki SZ Viewer new.txt
File Type:
Downloaded:	0 times
Size:	34 bytes

Torque Pro Diagnostic Database: Extended PID Files, Plugins & Initialization Strings

DESCRIPTION:
Torque Pro - the best program for diagnosing cars using the ELM327 Bluetooth adapter + smartphones/tablets on Android. The program is used to obtain and display diagnostic information about the operation of the engine and automatic transmission gearbox. The Torque Pro interface has 7 customizable screens that allow you to display information in the form of graphs, digital values, and a dial.

PID FILES:


* BYD F3 ECU Delphi MT20U
* Citroen C4 2014
* Citroen C5 5FN 2011
* Chery Tiggo
* Chevrolet Daewoo Sirius D42
* Daihatsu Sirion - Toyota Passo
* Daihatsu Terios
* Ford Focus 2004 1.8TDCi
* Ford Focus II
* Geely M7.9.7
* Geely MT20U2
* Geely ABS MK70
* GreatWall ECU Delphi MT20U2 + Lifan 620
* Honda Accord 2.4 2009
* Honda FIT GK3 2014
* Hyundai Elantra 2003 2.0
* KIA Venga 2010 diesel
* Lifan Solano ABS
* Land Rover Freelander II 2.2 SD4
* Land Rover Discovery III diesel 2.7
* Land Rover Discovery IV diesel 3.0
* Mercedes Benz W203 CDi 2005
* Mitsubishi Cedia GDI
* Mitsubishi Pajero 4 V93W 2010
* Mitsubishi Outlander 2008-2013
* Mitsubishi L200, new Pajero Sport
* Nissan Murano z51WOH
* Opel Combo-C 1.3 CDTi
* Opel Astra-K 1.6 2016
* Opel Multec S
* Opel Vectra B X18XE
* Opel Vectra Simtec 56.5
* Range Rover 3.6
* Renault Duster 2.0 2014
* Renault Duster 1.6 restyling
* Renault Duster 1.5 dCi 2016
* Renault Logan ECU EMS3132
* Renault Logan II, Sandero II
* Renault Kangoo 1.5 DCI 2008
* Renault Megane, Fluens
* Renault Megane II 2007 1.6 К4М
* Renault Sandero 2014
* Renault Scenic RX4 2002
* Renault Trafic 2
* Skoda Octavia
* SsangYong petrol 2.3 MSE
* SsangYong Kyron D20DT
* Suzuki Swift 2005
* Toyota Axio 2006
* Toyota Prius 2
* Toyota Prius 3
* Toyota Corolla 2002 diesel 2.0 1CD-FTV
* Toyota Cami K3-VE, Terios K3-VE, Duet EJ-DE, Terios EF-DEM
* Toyota Sienta ABS 1NZ-FE-CVT
* Toyota Vitz 1KRFE 2009
* VAG ECU EFI KW2089
* Volvo XC70 D5 2008
* VAZ ECU M7.3
* VAZ ECU Yanvar 5.1
* VAZ ECU Yanvar 5.1.1
* VAZ ECU Yanvar 7.2
* VAZ ECU Bosch MP7.0
* VAZ Largus ABS
* VAZ Largus SRS
* ZAZ Mikas 7.6
* ZAZ Mikas 10.3
* UAZ Patriot ECU M 17.9.7
* UAZ diesel ZMZ 51432

PLUGINS:

* Infiniti 1.1
* Fiat 1.6
* Fuel Economy 1.5
* Hyundai 1.9
* KIA 1.4
* Mazda Speed 2007-09
* Mitsubishi MUT 1.1
* Mitsubishi 1.9
* Nissan 1.3
* Racing Meter 1.8.2
* Renault 1.1
* Track Recorder 1.6.60


HOW TO ADD PID FILES ON TORQUE:
* Make to show hidden phone folders
* Go to hidden folder ".torque" -> go to the folder "extendedpids". you need to create if there is no it
* Copy your pid file on the folder "extendedpids"
* Open Torque app -> Setting -> Additional PID control -> Add new set -> Choose our pid file
* Add the desired sensor to the Torque dashboard

MAIN FUNCTIONS AND PACK CONTENTS

DIAGNOSTIC APPLICATION AND INTERFACE CONTEXT
* Engine and automatic transmission parameter monitoring via ELM327 Bluetooth/Wi-Fi adapters.
* Real-time telemetry rendering across 7 customizable screens using digital gauges, dials, and graphs.



Need it? Push button Thanks, PM for pass | or by email right now

Attached Files

Torque Pro new.txt
File Type:
Downloaded:	0 times
Size:	34 bytes

CNH EST Engineering: Heavy Machinery Diagnostic Software

WHAT INSIDE:


* Case New Holland Electronic Service Tools (CNH EST) 9.13 Engineering + CNH EST - ETimGO 8.18 2024
* Installation files inside only. (Only CNH EST 9.13 is included in this thread)

1. MAIN FUNCTIONS AND PACK CONTENTS

DEALER-LEVEL DIAGNOSTICS AND TROUBLESHOOTING
* Advanced diagnostic software designed for full system scanning, reading, interpreting, and clearing diagnostic trouble codes (DTCs).
* Enables live data monitoring, sensor calibration, and execution of guided component testing procedures.

ENGINEERING CONFIGURATION AND MODULE PROGRAMMING
* Engineering level access allowing deep parameters alteration, option configuration, and blank module programming.
* Provides capabilities for specialized low-level electronic control unit (ECU) adaptations and system resets.

2. PACK FEATURES

AGRICULTURAL AND CONSTRUCTION COMPATIBILITY
* Broad system coverage supporting agricultural and heavy construction equipment across various CNH group brands (Case, New Holland, STEYR, Kobelco, Flexi-Coil, Miller).

CLEAN INSTALLATION MATERIAL
* Contains standalone setup packages ensuring deployment and preparation for subsequent activation workflows.

BRIEF DESCRIPTION:
The diagnostic software for professional maintenance and engineering configuration of Case New Holland heavy machinery. Providing advanced dealer-level engineering diagnostics, this installation pack allows technicians to execute control module adjustments, follow official troubleshooting workflows, and monitor real-time system parameters across agricultural and construction fleets.



Need it? Push button Thanks, PM for pass | or by email right now

Attached Files

CNH EST Engineering new.txt
File Type:
Downloaded:	0 times
Size:	34 bytes

Looking for a specialist who can help reprogram an engine control module (PCM) using Ford IDS.

Details:
• Replacement PCM: 4U7-12A650-EA
• Original PCM: 4C11-12A650-JG
• Vehicle: Ford Transit 2.4 TDCi, 2005, 135 hp
• VIN: WF0LXXTTFL4C47718

If you can help or know someone who can please get in touch.

Case Service Training Library: Technical Courses for Construction Equipment

WHAT INSIDE:

* Compact Exc STM Final
* Skid Steer
* B Series Grader course files
* Case M Series Crawler Dozer
* Case N Series TLB STM class files
* Case Skid Steer Student copy
* CE EST TM 0113
* CE EST UPDATE 042013
* COMPACT WL STM FINAL
* CXB Excavator
* CXC Excavator
* E Series Wheel Loader STM
* Engines CE TM
* F Series WLoader
* N Series Tier 4 Backhoe

1. MAIN FUNCTIONS AND COMPATIBILITY

TECHNICAL TRAINING PROGRAMS
* Collection of Case training materials developed for service technicians, mechanics, and technical personnel.
* Includes official training modules, classroom resources, and technical learning documentation.

EQUIPMENT SYSTEM EDUCATION
* Covers machine operation, maintenance procedures, diagnostics concepts, and component functionality.
* Provides detailed educational materials for understanding machine systems and service practices.

MACHINE COVERAGE
* Includes training documentation for compact excavators, skid steer loaders, wheel loaders, crawler dozers, backhoe loaders, and engine systems.
* Covers Case B Series graders, M Series crawler dozers, N Series backhoe loaders (TLB), E Series wheel loaders, F Series wheel loaders, CXB and CXC excavators, and compact equipment platforms.

2. PACK FEATURES

SERVICE TRAINING MATERIALS
* Contains STM (Service Training Manual) resources, student course files, and technical training updates.
* Suitable for technician development, workshop training, and self-study programs.

PROFESSIONAL EDUCATION
* Includes specialized materials covering Tier 4 technology, engine systems, construction equipment operation, and maintenance procedures.
* Useful for service centers, training departments, mechanics, instructors, and Case equipment specialists.

DESCRIPTION:
A professional collection of Case training and educational materials designed for technicians, mechanics, and service personnel. The package includes Service Training Manuals (STM), student course files, technical documentation, and machine-specific learning resources covering excavators, skid steer loaders, wheel loaders, crawler dozers, backhoe loaders, and engine systems. These materials provide valuable knowledge for equipment operation, maintenance, diagnostics, and technical training.



Need it? Push button Thanks, PM for pass | or by email right now

hi I need a boot read to
Ford S-max 2014
Bosch EDC17cp42 0281019300

Ford S-max 2014
Bosch EDC17cp42 0281019300
I have done egr dpf off and optimization a few years ago on this car, it has worked great now the owner wants to restore the ecu to original I still have the original file.
I ran kess or ktag clone boot when I did the ecu a few years ago
now I wrote the original file with bench KT200 and the car does not start and the diagnostic system does not find the ecu. what could I have done wrong?
I started with kt 200 bench read eeprom and flash then I wrote back the org file chose not to adjust checksum does not start then I tried writing in boot no difference do you have any idea?

Hi i need help Secondary Air pump off dtc off P2443 2011 saab trionic 8

https://www.dropbox.com/scl/fi/lgauqyt65iojen3wye2u1/saab.rar?rlkey=xrjl2y11lt019w4203ew2yfek&dl=0

hi i need help volvo v50 edc16c34 dpf off aditive off and fix chk


https://www.dropbox.com/scl/fi/xlynluq99i856fryr55u0/orgflash.rar?rlkey=bos659neoyiyxqkwz1pcsjnr3&dl=0

List of Kobelco Hydraulic Excavator Models:
▪ SK09SR
▪ SK15SR / SK20SR
▪ SK25SR / SK30SR / SK35SR
▪ SK40SR / SK45SR
▪ SK50SR
▪ SK60
▪ SK70SR / SK75UR / SK80CS
▪ SK100 / SK120 / SK120LC
▪ SK115SRDZ / SK135SRLC / SK135SRL
▪ SK140SRLC
▪ SK170-8
▪ SK200 / SK200LC
▪ SK200-8 / SK210LC-8
▪ SK210 / SK210LC
▪ SK235SR / SK235SRLC
▪ SK250 / SK250LC
▪ SK250-8 / SK260LC-8
▪ SK310 / SK310LC
▪ SK330 / SK330LC
▪ SK350-8 / SK350LC-8
▪ SK480 / SK480LC

Dealer Service Documentation (Kobelco Shop Manuals)
This archive represents a database of professional dealer service manuals (Shop Manuals) for Kobelco hydraulic excavators — ranging from compact SR series to heavy crawler machines.

The documentation is designed for in-depth diagnostics, maintenance, calibrations, and component repair. The manual structure is standardized and consists of four main sections:

I. GENERAL
Basic data required to start working with the machine and assess its condition.
▪ Specification: Technical characteristics of the machine.
▪ Location and Weight of Components: Layouts of main assemblies and their weight (critical for safe dismantling and removal).
▪ Maintenance Standard and Test Procedure: Reference values (circuit pressures, flow rates, clearances) and step-by-step procedures for their verification.
▪ Working Standard & Standard Man-Hour Table: Standard hours allocated for repair operations.

II. SYSTEMS
Section for system diagnostics and understanding the operational logic of the excavator.
▪ Hydraulic, Travel, Swing/Upper Structure: Hydraulic circuit diagrams and operating principles of hydraulic lines.
▪ Electrical & Control System: Wiring diagrams, pinouts, and controller logic.
▪ Troubleshooting: The most important diagnostic section. Contains algorithms for finding the root cause of failures based on symptoms or error codes.

III. COMPONENTS
Instructions for component repair (disassembly, inspection, assembly).
▪ Hydraulic Pump, Motor: Repair of the main pump, travel, and swing motors.
▪ Control Valve: Overhaul and adjustment of the main control valve.
▪ Other components: Swivel Joint, hydraulic cylinders, Reduction Unit, and basic Engine work.

IV. PROCEDURE
Step-by-step algorithms for safe removal, installation, and adjustment of equipment.

SUMMARY:
This documentation enables comprehensive service support for Kobelco excavators. It covers all specialist needs: from checking hydraulic pressure with testing gauges and reading wiring diagrams to the complete overhaul of main hydraulic components and travel reduction units.



Need it? Push button Thanks, PM for pass | or by email right now.

Attached Files

Kobelco Service + Repair Manuals new.txt
File Type:
Downloaded:	2 times
Size:	34 bytes

Archive of factory technical manuals Porsche Service Information Technik (SIT).
This is specialized documentation for dealership personnel, providing
a deep dive into engineering solutions for 1975–2017 models.

CONTENT:
- Construction & Engineering: Detailed descriptions of new components,
assemblies (engines, transmissions), and changes between generations.
- Systems & Logic: Breakdown of electronic control algorithms, engine
management, chassis systems, and driver assistants.
- Technical Parameters: Specifications, torque settings, fill capacities,
and official service approvals/fluid standards.
- Functional Description: Technical foundation required for deep
diagnostics and understanding vehicle system principles.

WHO IT'S FOR:
Professional mechanics, diagnosticians, and owners who require an expert
level of understanding of Porsche vehicle architecture beyond standard
owner's manuals.


MODEL LIST:
911
- 911 GT3
- 1975-1989 911
- 1989-1993 964
- 1994-1998 993
- 1999-2004 996
- 2005-2011 997
- 2012-2017 991

918 Spyder

924, 944
- 1981 924, Turbo
- 1982 924, Turbo
- 1983 924, 944
- 1984 924, 944
- 1985 924, 944
- 1985 944 Turbo
- 1986 924S, 944, 944 Turbo
- 1987 924S, 944, 944 Turbo
- 1988 924S, 944, 944 Turbo
- 1988 944 Turbo S
- 1989 944 S2
- 1989 944, 944 Turbo
- 1989-90 944 S2 Cabriolet
- 1990 944 S2, 944 Turbo
- 1991 944 S2
- Porsche 924 Technical Specif

928
- 1979 928
- 1980 928 S
- 1980 928
- 1981 928
- 1982 928
- 1983 928 S
- 1985 928 S
- 1986 928 S
- 1987 928 S4
- 1988 928 S4
- 1989 928 GT
- 1989 928 S4
- 1990 928 S4 GT
- 1991 928 S4 GT
- 1992 928 GTS
- 1993 928 GTS
- 1994 928 GTS

968
- 1992 968
- 1993 968
- 1994 968

Boxster-Cayman
- 1997 Boxster
- 1998 Boxster
- 2000 Boxster
- 2001 Boxster
- 2002 Boxster
- 2003 Boxster
- 2005 Boxster
- 2006 Cayman
- 2006 Cayman-987-Wiring-Diagrams
- 2007 987 Boxster-Cayman
- 2009 Boxster, Cayman
- 2011 Boxster Spyder
- 2013 Boxster
- 2014 Cayman
- 2016 Cayman GT4
- 2017 718 Boxster

Carrera GT
- 2004 Carrera GT

Cayenne
- 2003 cayennemaintenance
- 2003-04 Cayenne
- 2004 Cayenne
- 2005 Cayenne
- 2006 Cayenne
- 2008 Cayenne
- 2011 Cayenne Hybrid
- 2011 Cayenne
- 2013 Cayenne Diesel V6
- 2015 Cayenne S E-Hybrid
- 2015 Cayenne

Macan
- 2015 Macan
- 2017 Macan

Panamera
- 2010 Panamera
- 2011 Panamera V6
- 2014 Panamera S E Hybrid
- 2014 Panamera



Need it? Push button Thanks, PM for pass | or by email right now.

Attached Files

Porsche SIT 1975–2017 - Factory Documentation new.txt
File Type:
Downloaded:	12 times
Size:	34 bytes

I have this flash file that was made ad blue off with davinci I have lost the original file and need to restore this file to original, or if anyone has an original flash file



EDC17cp57 0281031184



MERCEDES, GLS-CLASS SUV (X166), 15-20, 350 d Diesel 4-Matic SUV, 2016-2020, 190kW/258HK, 2987CC, OM642.826

WDC1668241B120022

OM642.826

https://www.dropbox.com/scl/fi/i3nef6kwo...2uf2s&dl=0

hello can someone help me to repair 
after battery flat the immo lamp all time on 
in ecm i dont see vin in identification 
and ecm locked and no start

Attached Files

S3000 21585948-6A.zip
File Type:
Downloaded:	5 times
Size:	545 bytes

Files inside:
BMW E-Sys 3.27
Premium Launcher
PSdZdata 63 Lite
Windows 7 x64 English VMware

1. BMW E-Sys 3.27
This is a stable "engineering" version of the software for BMW F, G, and I-series vehicles. It is used for:
- Function coding (activating hidden options);
- Editing trim levels (FA/VO);
- Programming (flashing) electronic control units.

2. E-Sys Launcher Premium (by TokenMaster)
E-Sys itself is closed for editing critical data.

The launcher performs two main tasks:

- Token generation (.EST): Allows the "FDL Coding" function
(changing individual parameters within the unit). Without this, you can only
change the entire trim level, not individual settings.

- Un-trimming (Mapping): In newer databases, BMW removes function names,
leaving periods or empty strings. The launcher replaces this data,
returning human-readable names (for example, instead of "3001 > .."
you see "3001 > Speed_Limit").

3. Differences in PSdZdata Databases
PSdZdata contains firmware and module descriptions that are "inserted"
into E-Sys for vehicle operation.

PSdZdata LITE:
- Purpose: Exclusively CODING (hidden functions, settings).
- SWFL files: None (cut to save space).
- Disk space: ~5-15 GB.
- Pros: Takes up little space, downloads and installs quickly.

PSdZdata FULL:
- Purpose: PROGRAMMING (firmware) + coding.
- SWFL files: Included in full.
- Disk space: ~150-350 GB.
- Pros: Allows you to fully update your vehicle's software and restore control units.

* SWFL (Software Files) are large firmware files required for updating control unit software.

4. Which one to choose?
- If you're a beginner and just want to activate functions (start-stop, logos, videos): download the LITE version.
- If you plan to update your vehicle's firmware or replace the hardware with used equipment: you need the FULL version.


Need it? Push button Thanks, PM for pass | or by email right now.

Attached Files

BMW E-Sys VMware new.txt
File Type:
Downloaded:	13 times
Size:	34 bytes

Mitsubishi L200 2017 keyless and remote lock don't work radio don't work there are no error codes the radio can't communicate with the diagnostic computer all fuses are intact. does anyone have access to the wiring diagram

Hello,

Can anyone tell me what is the Pre-Dieselgate SW / V number for CBBB engine VW Passat CC?

SW: 03L 906 022 QG
HW: 03L 907 309
V: 9978

Can I do it on ODIS-E, it allows downgrade?

Thank you.

hi

i need repair my file 24c16 renault modus sering DF002 error code delete crc repair thank you

Attached Files

modus_error_DF002.zip
File Type:
Downloaded:	4 times
Size:	1.04 KB

CAT SIS (Service Information System) 2021 is the latest fully functional offline version of the Caterpillar database. All subsequent versions (CAT SIS Web) are web-only.

MAIN SOFTWARE SECTIONS:
- Spare parts catalogs.
- Repair and operation manuals.
- Component disassembly and assembly instructions.
- Electrical and hydraulic diagrams.
- Maintenance schedules.
- Specifications and technical data.

SUPPORTED EQUIPMENT (1977-2021):
- Construction and quarry equipment.
- Road construction equipment.
- Industrial, marine, and automotive engines.
- Electric generator sets.

PC SYSTEM REQUIREMENTS:
- OS: Windows 10 or Windows 11 (64-bit).
- RAM: 8 GB or more (16 GB recommended for 3D graphics).
- Storage: SSD only (the database will run very slowly on an HDD).
- Disk space: 300-350 GB of free space at the time of installation.



Need it? Push button Thanks, PM for pass | or by email right now.

Attached Files

CAT SIS 2021 new.txt
File Type:
Downloaded:	13 times
Size:	34 bytes

hello
can someone have tested solution i tried meuchi decoding tool not work 
i disconnect the black immo box not start same thing
can someone disable immo in eeprom 24c16
thanks in advance

0 281 001 537

Attached Files

iveco daily ms6.3 ori.rar
File Type:
Downloaded:	4 times
Size:	867 bytes

Thread files:
NERS Operation Manual pdf
NERS 03.08.00 (installation files)
NERS 04.03.00 (installation files)
NERS 04.00.01 (installation files + calibration)

RELEASE YEARS AND VERSIONS:
NERS 03.xx: Supports vehicles from 1999 to 2018.
NERS 04.xx: Supports vehicles from 1999 to 2019.

Note: From 2020 and newer, programming has been moved to Consult III Plus.

CARS:
Nissan, Infiniti, Datsun.
Engine module (ECM) and transmission module (TCM) programming is supported.

HARDWARE (J2534):
Works with VCIs that support the J2534 standard. For example:
1. Scanmatik 2 PRO
2. MongoosePro Nissan / MongoosePro MFC2 by DrewTech
3. DrewTech CarDAQ-Plus 3
4. Tactrix Openport 2.0

WHAT THE PROGRAM CANNOT DO:
- NO DIAGNOSTICS: cannot read or clear DTCs.
- NO DATA STREAM: cannot view real-time parameters (Live Data).
- NO SERVICE FUNCTIONS: cannot learn the throttle body or reset automatic transmission/CVT adaptations.
- NO KEY WORK: does not program chips or work with the immobilizer (NATS).

SUMMARY:
NERS is a tool EXCLUSIVELY for writing factory calibration files. All other diagnostic and service tasks are performed by Nissan Consult.



Need it? Push button Thanks, PM for pass | or by email right now.

Attached Files

Nissan NERS + ECU Reprogramming files + Operation Manual new.txt
File Type:
Downloaded:	14 times
Size:	34 bytes

Hello . Can anyone help me with cloning ?
Old controller burned . I bought another controller . It doesn't work with emulator.


Thanks for the answer

Attached link with flash file!

Attached Files

Document text nou.rar
File Type:
Downloaded:	17 times
Size:	85 bytes

HELLO 
i need eeprom content of easytronic opel meriva 1.6 z16xep
or repair my file after learn clutch with opcom error p1734
thanks in advance
HW. LUK0207010110

Attached Files

eeprom.rar
File Type:
Downloaded:	4 times
Size:	639 bytes

Z16XEP MERIVA 2007 ORI P1734.zip
File Type:
Downloaded:	6 times
Size:	735 bytes

hi is it possible to clone ford siemens sid 206 5ws40757c-t

i have 2 used ones with the same number

Hello,

I am searching for an ori stock file for Bosch EDC16C2.

I need the exact original file for comparison and verification.

ECU details:


MPC 555/556

EPEE = 1

External Flash AM29BL802

EDC16C/C2-7.

1037390865P

EEPROM 4Kb

0281011624

A6461538579



Thank you


--= Solved =--

Attached Files

edc16c2_org_ExtFl.rar
File Type:
Downloaded:	5 times
Size:	245.88 KB

Hello! I have this error message:" failure antipollution" and counts down from 1000 km that can be driven, there is no error code in the system. Can this problem be solved with Canclip or Renolink?? thanks

Pleas can i got help egr off aditive off peugot 308 edc17c60

Need ori file for Infiniti FX30d 0281018021 EDC16CP42 SW 513704 Thanks!

Toyota GTSplus (Global Techstream+) 2026.02.002
This is updated software for Toyota diagnostics and maintenance.

Supported brands:
Toyota, Lexus, Scion

Supported diagnostic tools (VCI):
DrewTech CarDAQ (Plus/Plus 2/Plus 3)
Bosch VCI
Autel MaxiFlash

Supported vehicle years
from 1996 to present.
Full support for new communication protocols used in new Toyota/Lexus hybrid and electric vehicles (including CAN FD and DoIP).


Need it? Push button Thanks, PM for pass | or by email right now.

Attached Files

Toyota GTSplus Global Techstream+ new.txt
File Type:
Downloaded:	16 times
Size:	34 bytes