Hey guys,

i need a solution for an Opel Corsa 1.0 ecotec.

DTCs:
P2145 EGR Sensor
P0401 EGR
P0130 O2 Sensor Bank 1 Sensor 1

i made an attempt in WinOLS and would need further help as im a beginner.

Using the Damos i found:
B04DC       Codeword DAGR deactivation CD..=0
and
B04DD       Codeword Diagnostic Position sensor deactivation CD..=0

then there is also
B2BA3        Codeword for AGR on/off 1x1 map
but i dont know if i should change that or not ass i think the first two should do it?

i changed those values to 0, is this already enough?

Now i also want to delete the errors and find the error path, when i search for P "0130" in -16bit and hex- i can find several entries (4 in total)

fe.
@00132
@1AFF4
@9D3DE
@A4574

so for me the Error is @A4574?
Error block starts at @A4500 / @A452E / @A454E / @A455C ??
   

however now i switch over to -8bit and decimal-
then press Strg+G -> @A4574 to go to the error
and check the area behind the error codes for the Error path values?
   
where do the error paths start?
@A4585? @A4590?

This is so far what i gathered from the tutorial from vagecumap which is probably totally different as its for edc16 and i have me7.6.2 ecu here?

If someone has a solution, i wouldnt say no but still want to start learning this =)

Does anyone have Suzuki SDT-II_soft_2220103 please?

on a mega download if possible please?


Amaa Many thanks for the link, all working now 

hi.

here you have carprog 10.93 work with 8.21 FW.

Attached Files

carprog.rar
File Type:
Downloaded:	114 times
Size:	162 bytes

Hi,

I have problem with reading immo module from Opel Vectra B 1999 year with Motorola MC68HC05B6 0F10V. I am using orginal UPA-S Programmer and special orginal adapter for it - UPA HC05 HC705 (bought in Tomsad site photo in attached.)

After I desolder Motorola from board and put it into HC05 adapter in UPA connections test I have TxD in red colour with value 0,02V (all other connections are green). After this when I am trying to read this Motorola I get in Upa message - Frame error.

I was trying to change the voltage and oscillator values.

Am I doing somethink bad? or it is not my fault. Please help. Photos from reading in attached

Attached Files

Thumbnail(s)
               

Hi, anyone have this ori file?

HW: 0034461240
SW: 0009024201
SW UPG: 0009032600

MERCEDES C63 AMG ME9.7

Hello to all members, I received a Ford fiesta 1.4 hdi, ecu siemens SID 804, the car does not start, the immobilizer light flashes, I tried to reprogram the key (I only have one key ) but it does not work, I'm looking for a Dump ori or blank with these references

Attached Files

Thumbnail(s)
   

hello mate i need dash dump sprinter w906
a9069005200

a9069013400

a9069027700

many thanx

Please find isn from this dump

Attached Files

BMW 28F010.rar
File Type:
Downloaded:	35 times
Size:	43.96 KB

Hi, please help me. I need DTC OFF for MED9.1 Audi

Thank you very much

DTC:

VAG code 08567
OBD code P2177

Attached Files

AUDI_A4521_075.rar
File Type:
Downloaded:	55 times
Size:	697.68 KB

Hello.

Need clear dump for mini cooper trw


mini cooper trw
6577 9367838 airbag 
eep 95256
1304410


Thanks in advance.

Attached Files

mini 9367838 crash.rar
File Type:
Downloaded:	33 times
Size:	3.57 KB

Hello do you thing is posible change coding. I want to change that if I turn the traffic lights in the same time turn on the for light and which software workinh good with this vehicle?

Helo.

I need help for virgin o repair file from BSI c4 2016

Thank for help

Attached Files

C4 BSI ORI FULL CONTINENTAL 2015.rar
File Type:
Downloaded:	53 times
Size:	577.36 KB

72Hello All!
I need clear crash
Hyundai IX20

Autoliv
95910-1K100
618702700
ver 1.2
mac7242
Thanks!

Attached Files

95910-1K100 MAC7242.rar
File Type:
Downloaded:	60 times
Size:	223.1 KB

Renault Can clip 178 vmware

Best regards!

Attached Files

Can clip v178 vmware.rar
File Type:
Downloaded:	133 times
Size:	214 bytes

Can someone help me for my discover pro.
I have no sound anymore.

Hi.

I have been trying to find a decent, honest, good , professional Agriculture file writer.

I search on the web for Agriculture tuning, and everybody claims to be the best, the number 1, but when their mod file is applied, it has not much improvent.

I don't want to work with big companies that only suck from you and want you to be their slave dealer like most tuning companies, plus they charge too much which when presented prices to end customers, they just don't want to go ahead with mod.

Mainly engine+pto power increase, torque increase and better pedal response, but all within maximum safe limits.
Also have once and then DPF+EGR+ADDBLUE+UREA remove, but rarely.

Any recomendations of file writer that is not a Bull Shxter copy paste type of file writer?
I work mainly with John Deere, New Holland, Claas, Deutz, but have Kess v2 master for OBD and Ktag for bench, which of course does many more, but the brands mentioned, are the ones I work with most.

Best regards.

Hi Friends, 

Can someone make DPF EGR and Additive Pump with faultcodes ( P1445 P0460 P1435 P1434) off please. 

Thanks in advance.

Attached Files

iRom_1037516511.rar
File Type:
Downloaded:	49 times
Size:	970.81 KB

Hi, does anyone can delete speed limiter ?
Car is Renault Master 3.0DCi EDC16
Swiftec solution not work.

Attached Files

Renault Master edc16.rar
File Type:
Downloaded:	60 times
Size:	30.44 KB

Anybody help?  I need wiring diagram . Opel Astra G 1.4 XEP 2008 year  engine and immo wiring.

Hello.

Looking for Iveco EASY 14.1 + updates or downloaded updated Iveco EASY from server.

Thank you

BMW KSD (Kaufmännische Service Daten, i.e. Commercial Service Data) is a collection
of invaluable data for determining labor hours, inspection sheets and general service methods.
There's also information about wheels and rims for the various models.

As ever password protected archives for keep links alive , ask for it on private message as the forum rules send.

I hope be useful.

:-)

Attached Files

BMW KSD 03.2019 (19.03.1.5).txt
File Type:
Downloaded:	45 times
Size:	80 bytes

Group diagnostic software VAG supports an interface compatible with SAE J2534 (diagnostic interface). With this software it is possible to diagnose all the vehicles of the Volkswagen, Audi, Skoda, Seat, Bentley and Lamborghini brands.

You also have access to the following information during vehicle diagnostics:

vehicle data
workshop manuals
circuit diagrams
field measurements
Technical information of the product.

The following VAS diagnostic interfaces are compatible:

VAS 6154 (compatible with WLAN) (Windows 7 + Windows 10)
VAS 5054A (Radio over Bluetooth) (Windows 7)
VAS 5055 (cable through USB port) (Windows 7)
In addition to the above-mentioned VAS diagnostic interfaces, the External Diagnostic Information System is also compatible with other diagnostic interfaces compatible with SAE-J2534. For commissioning, connect the corresponding box to the diagnostic tester through the USB port and install the appropriate driver software before starting the ODIS service. The installation of the software may require administrator rights.


As ever password protected archives for keep links alive , ask for it on private message as the forum rules send.

Files compressed separately to help those who already have part obtained from other posts and only need one.

I hope be useful.

:-)

Attached Files

ODIS 5.1.3 + Postsetup 86.0.20.txt
File Type:
Downloaded:	340 times
Size:	517 bytes

Hello all.

I have grand problem this Renault Clip.

In work to Programing i have 12.5 - 12.6 voltage
And No programing. Need 12.7 - 13.0 i have good Bosch voltage Boxter But problem low voltage.....
Any ideas for rework china clone.....

Thank

I try to Code Amg menu at my w204 coupe .. Can someone help my doeing that??

I start this thread,because we all see funny pics and posts all over the internet!
so Lets share!     



   
   
   
   

Tried to write this tuned file in my car,denso ecu,car starts but after 15seconds stops...it could go to any rpm ,but for this limited time..
ign off for a few seconds then car starts again and does the same thing..
with ori everything is ok!Can someone check the tune??
Or help me with a working one?i will pay if needed!

Attached Files

ori and tuned.rar
File Type:
Downloaded:	59 times
Size:	108.71 KB

hi everyone maybe someone has working immo off solution on 
2008 ssangyoung kyron 2.0dt e4
dcm3.2ap A6645408432
epprom 95320 dump atached
willing to pay no for working solution
thanks

Attached Files

ssangyoung kyron.rar
File Type:
Downloaded:	47 times
Size:	1.3 KB

Hello I have strange case with Blower regulator from Mercedes.
The fan blower was working on fasten speed.
I change the blower regulator for new and now the fan is working with slower speed but if you removed the key the fan is still working for abouth 10min so I change the climat control device and the same problem.
If I turn on the key the fan start to working but no speed change reaction.
The plug has 4 pin
1 pin brown - ground
2 pin white pink 12v after ignition
3 pin red and blue constantly 12v
4 pin green around 10v

Please help to solve the problem