Immo Doctor v2.1 2023

MULTI EDITOR-By Dr.Saleh v2

HYUNDAI-KIA-DTC OFF By Dr.Ssh

hpt to bin Converter


NO VIRUS - TESTED

Remember Reputation and Thanks

Attached Files

Link.txt
File Type:
Downloaded:	256 times
Size:	73 bytes

I Need original file Toyota Avensis:

SW 89663-05G90

Act SW 305G9000

Engine; 1ADFTV

New Multiecuscan v5.0

Remember Reputation and Thanks
 

Attached Files

Link.txt
File Type:
Downloaded:	120 times
Size:	73 bytes

Good, I need someone who can repair the nand read from the bga63 K9F5608U0D any help thanks

Attached Files

flash.txt
File Type:
Downloaded:	31 times
Size:	73 bytes

Please checksum correction, Nissan Bosch M4.6

Attached Files

Nissan M4.6.rar
File Type:
Downloaded:	37 times
Size:	135.76 KB

Perkins -  Service Manuals, Fault Codes and Workshop Manuals

What inside:
Perkind 100, 4.41, 500, 700, 900, 1000, 1300 Service Data Booklet
Perkins 4012 and 4016 Gas Engine - PDF Service Manual
Perkins 1000 AJ-AS-YG-YK Workshop Manual
Perkins 1000 Series - PDF Service Manual
Perkins 1000 Series New (Models AJ to AS and YG to YK) Workshop Manual
Perkins 1100 Series 4 cylinder diesel engines workshop manual
Perkins 1103 & 1104 Series Workshop Manual
Perkins 1103 1104 Industrial Engines
Perkins 1103 and 1104 Industrial Engine - Operation and Maintenance PDF manual
Perkins 1103 and 1104 Industrial Engines - PDF Service Manual
Perkins 1103D Industrial Engines - PDF Service Manual
Perkins 1104 Product Manuals 26250_L
Perkins 1104 Series Workshop Manual - Troubleshooting
Perkins 1104A Disassembly & Assembly
Perkins 1104D (Mech) Industrial Engine - PDF Service Manual
Perkins 1104D EURO 3 - 80CV - 100CV Repair Manual
Perkins 1104D Industrial Engine - PDF Service Manual
Perkins 1104D NH1 NJ1 werkplaats handboek
Perkins 1104D Parts Manual
Perkins 1104D-E44T and 1104D-E44TA Industrial Engine - PDF Service Manual
Perkins 1106A-70T, 1106A-70TA, 1106C-70TA and 1106D-70TA Industrial Engine - PDF Service Manual
Perkins 1106C Genset - PDF Service Manual
Perkins 1106C Genset Operation And Maintenance Manual
Perkins 1106C Genset Systems Operation Testing And Adjusting
Perkins 1106C Troubleshooting Manual
Perkins 1106C-E70TA and 1106D-E70TA Industrial Engine - PDF Service Manual
Perkins 1106D Electric Power Generation(EPG) Troubleshooting Manual PDF
Perkins 1106D Industrial Engine - PDF Service Manual
Perkins 1106D-1104D Electrical Installation Guide
Perkins 1204E-E44TA and 1204E-E44TTA Industrial Engine - PDF Service Manual
Perkins 1206E-E66TA Industrial Engine - Operation and Maintenance PDF manual
Perkins 1206E-E70TTA Industrial Engine - Operation and Maintenance PDF manual
Perkins 1206F-E70TA and 1206F-E70TTA Industrial Engine - Operation and Maintenance PDF manual
Perkins 12oo Series Marine Auxiliar Engines Troubleshoting Guide
Perkins 1300 Edi Series Electronic Engine Training
Perkins 1300 Series EDi (Models WK to WN) User's Handbook
Perkins 1300 Series EDi Engine - PDF Service Manual
Perkins 1300 Series Electronic Engine Training
Perkins 1506A-E88TA, 1506C-E88TA and 1506DE88TA Industrial Engine - PDF Service Manual
Perkins 1600 Series Industrial Engines - PDF Service Manual
Perkins 2206-E13 Industrial Engine - PDF Service Manual
Perkins 2206D-E13TA Industrial Engine - PDF Service Manual
Perkins 2206F-E13TA Industrial Engine - PDF Service Manual
Perkins 2300 Series (Model 2306C-E14) Workshop Manual
perkins 2300 Workshop Manuals
Perkins 2506-15 Industrial Engine - PDF Service Manual
Perkins 2506D-E15TA Industrial Engine - PDF Service Manual
Perkins 2800 Series (Model 2806C-E16) DIAGNOSTIC MANUAL
Perkins 2800 Series Engine - PDF Service Manual
Perkins 2806C-E18 TAG1 TAG2 and TAG3 Workshop Manual
Perkins 2806D-E18TA Industrial Engine - PDF Service Manual
Perkins 2806F-E18TA Industrial Engine - PDF Service Manual
Perkins 3.152 Workshop Manuals
Perkins 4 Cyl Engine Parts list
PERKINS 4-108 PARTS BREAKDOWN
Perkins 4.107 4.108 4.99 Workshop Manual
Perkins 4.108, 3.125, 4.203, 4.236, 63544, v8.540 Service Data Booklet
Perkins 4.108M, 4.107M, 4.99 M
Perkins 4.2482, 4.248, T4.236, 4.236, 4.212, T4.38 Workshop Manual
Perkins 400 Series 4016-E61TRS (Models 403C-11, 403C-15, 404C-22 and 404C-22T) Workshop Manual
Perkins 4000 Series (4006-23 TAG1A, TAG2A and TAG3A Inline diesel engine) Workshop Manual
Perkins 4000 Series Diesel Engine - PDF Service Manual
Perkins 4000 Series Inline diesel engine - PDF Service Manual
Perkins 4006 and 4008 Diesel engine - PDF Service Manual
Perkins 4006 TRS Gas and 4008 TRS Gas Industrial Engines - PDF Service Manual
Perkins 4006 TRS Gas and 4008 TRS GasIndustrial Engines Workshop Manual
Perkins 4006-23 and 4008-30 Industrial Engine - PDF Service Manual
Perkins 400A and 400D Industrial Engine - PDF Service Manual
Perkins 4012- 4016 Workshop Manual
Perkins 4012-46A Industrial Engine - PDF Service Manual
Perkins 4016-61 TRG Industrial Engine - PDF Service Manual
Perkins 4016-61TRS1 and 4016-61TRS2 Gas Engines - PDF Service Manual
Perkins 402D-403D-404D Industrial Engine Disassembly and Assembly Manual
Perkins 402D-403D-404D Industrial Engine PDF Service manual
Perkins 402F-05, 403F-07, 403F-11, and 403F-15 Industrial Engines - PDF Service Manual
Perkins 403F-15T, 404F-22 and 404F-22T Industrial Engines - PDF Service Manual
Perkins 404A-22SG1 Gas Industrial Engine - PDF Service Manual
Perkins 404F-E22T, 404F-E22TA and 403F-E17T Industrial Engines - PDF Service Manual
Perkins 6354 Fase IV Catalogue
Perkins 700 Workshop Manuals
Perkins 800D Series Industrial Engines - PDF Service Manual
Perkins 854E-E34TA and 854F-E34T Industrial Engine - PDF Service Manual
Perkins 854F-E34TA Industrial Engine - PDF Service Manual
Perkins DIAG1300 User manual
Perkins Diesel Engine 4-154 Workshop Manual
Perkins Diesel Engines Identification and Serial Numbers
Perkins Diesel Engines Powered Product Catalogue 2011 - Parts&Service
Perkins Disassembly and Assembly 1106D Industrial Engine
Perkins Engine Fault Finding Guide
Perkins Engine Number Guide
Perkins Gauges, Switches and Senders - Parts Catalogue
Perkins Operation and Maintenance Manual 1104E Engine
Perkins Operation and Maintenance Manual 1106D Industrial Engine
Perkins Parts Book
Perkins Phaser 1000 Series Workshop Manuals
Perkins Phaser 4 - and 6-cylinder Workshop Manual
Perkins Service Data Booklet
Perkins SSP I-B Installation & Operational Manual
Perkins Systems Operation Testing and Adjusting 1104E Engine
PERKINS TIER2 DIESEL ENGINES 1100 (VK) Workshop Manual
Perkins TPD1352 - PDF Service Manual
Perkins Troubleshooting 1104E and 1106E Engines
The codes refer to the model range of engines Perkins
Workshop Manual for Perkins 4.108, 4.107 and 4.99 diesel engines
Workshop Manual for Perkins 4.108M, 4.107M and 4.99M diesel engines



Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.

Attached Files

Perkins Service and Workshop Manuals.rar
File Type:
Downloaded:	47 times
Size:	249 bytes

Hello I am looking for user defined files to be able to tune vehicle to it's full extent

Gf Immo Toolx is a Windows based application that performs automatic editing to Immo Off and Factory Mode (Virgin) of binary files of the 

following Marelli ECUs from the FCA group (Fiat, Abarth, Alfa Romeo, Lancia, Chrysler):


1. IAW7GF -  Immo Off and Factory Mode. (Fiat, Abarth, Alfa Romeo, Lancia)

2. IAW10GF - Immo Off and Factory Mode. (Fiat, Abarth, Alfa Romeo, Lancia and Jeep)

3. IAW8GSW - Imoo Off. (Fiat, Abarth, Alfa Romeo, Lancia)

4. IAW8GMF - Immo Off. (Fiat, Abarth, Alfa Romeo, Lancia)

5. MJ9DF  - Immo Off. (Fiat, Abarth, Alfa Romeo, Lancia)

6. MJD8F  - Immo Off. (Fiat, Abarth, Alfa Romeo, Lancia)

7. MJD6F  - Immo Off. (Fiat, Abarth, Alfa Romeo, Lancia)

8. IAW8GMB - Immo Off. (Fiat, Abarth, Alfa Romeo, Lancia)


All Immo Off functions are performed on the Flash Memory file, in its calibration area (map area), therefore these functions can

be performed on Flash binaries generated through any connection mode that your ECU programming tool performs (OBD2, Bench mode,

Boot Mode or JTAG mode), GF Immo Toolx being compatible with any binary file generated by all brands of programming tools on the

market.


The *Factory Mode* function do virgin operation on the ECU file, putting it in the state as it comes from the Factory, ready for

new vehicle immobilizer system programming. This function is performed on the Memory file eeprom.

Apart from the above-mentioned function, GF Immo Toolx has the exclusive feature of checking the integrity of the Eeprom memory

data, very important when performing the immo off function on IAW7GF and IAW10GF ECUs.


It should be noted that ALL the functions carried out by GF Immo Toolx are editions made on the original file and based on in the

change switches in the software, therefore the original settings and calibrations of the ECU remain intact and it does not perform

Generic file-based operations.


Thanks to its advanced algorithm, the recognition of the file loaded in GF Immo Toolx is completely automatic, and it is not necessary

to the previous selection of the ECU type by the user.


GF Immo Toolx has a modular system of supported ECU families, which makes it flexible at the time of purchase, since the user can

purchase the ECU family modules individually or can order the full version (all ECUs activated) obtaining with the latter a special

price that we will detail in the 'Frequently Asked Questions' section. The activation of modules after its acquisition is completely

dynamic, not requiring a new installation of the application.


Frequently Asked Questions

Q: What operating system is GF Immo Toolx compatible with?
A: GF Immo Toolx works perfectly on Windows 7, 10 and 11.

Q: How much does the application and its modules cost?
A: The basic GF Immo Toolx software (without any modules activated) is priced at USD 120 / 1 License for 1 PC.

  The price of each module is as follows:

  - Module 100 [IAW7GF]:  USD 40
  - Module 200 [IAW10GF]: USD 40
  - Module 300 [IAW8GSW]: USD 30
  - Module 400 [IAW8GMF]: USD 30
  - Module 500 [MJ9DF]:  USD 30
  - Module 600 [MJD8F]:  USD 30
  - Module 700 [MJD6F]:  USD 30
  - Module 800 [IAW8GMB]: USD 30

  *In the case of ordering the software together with the 8 modules (full version) the final price is USD 300.

  IMPORTANT!: The software is not sold without any module activated, the minimum purchase is: GF Immo Toolx + 2 modules of your

  choice.

Q: Can the license be migrated to another PC?
A: The license is sold exclusively for one PC under a unique HWID number which is linked to the PC where GF Immo Toolx will run,
     if the user for any reason must change the PC, the cost of the new license is USD 120 without affecting the modules already acquired.
    The latter can be done up to 3 (three) times, from the fourth migration the cost is USD 120 + the cost of the modules that were activated
    without exception.

Q: Are there subscription costs?
A: No, GF Immo Toolx currently has no subscription costs.

Q: GF Immo Toolx has updates and what is the cost?
A: GF Immo Toolx does not have updates, in the case of requiring an update, it will be done automatically through the
    server, there being no charges for it.

Q: Is an internet connection required to work with Immo Toolx?
A: Yes, the Internet connection is mandatory to work with the application.

Q: Is there a demo version of the program?
A: At the moment there is no demo version of GF Immo Toolx.

Q: What is the payment method?
A: The payment method is through Paypal. The instructions for payment are send exclusively by e-mail.

Q: Does GF Immo Toolx require a physical Interface?
A: GF Immo Toolx is an automatic binary file editing software, therefore it does not require any physical interface.

Q: What type of binary files does GF Immo Toolx support?
A: GF Immo Toolx supports the binary files (OBD2, boot mode or JTAG) of the following tools:

  - F.G. Galletto
  - Kess V2
  - Kess 3
  - KTAG
  - NewTrasdata
  - New Genius
  - DFox
  - I/O Terminal
  - Pe Micro
  - Flex
  - PCMTuner

Q: Does GF Immo Toolx perform checksum correction after making modifications to the file?
A: No, the correction will have to be carried out by the programming tool at the time of writing or by some software that supports said operation (eg: Winols).

Q: GF Immo Tool is only available in English?
A: Yes, Immo Tool is only available in English, and there are no other versions with other languages planned for the moment.

Q: What is the e-mail to purchase GF Immo Toolx and its modules?
A: The contact e-mail is the following: ventas_gf_immo_toolx@yahoo.com

Attached Brochure,  some videos with GF Immo Toox in action and screenshots.

https://www.youtube.com/watch?v=PGDQa4Mh8Pw



https://www.youtube.com/watch?v=uAldJRmeAeM&t=28s


https://www.youtube.com/watch?v=wLd3g0B10o4&t=12s

Hi guys, I own a 2019 XC60 T6 AWD Polestar. My battery died while I was on vacation so I had to replace it on the road... Luckily, I have found an aftermarket battery that fits.
Now I guess that I need to reset BMS. On my previous (P3) Volvo I could do it from VDASH or follow the procedure described many times on the forum (lights+fog light+...)...
Is there a similar procedure or a proven way to reset it on my car, since there is no option in VDASH and Carly? I guess the dealer won't reset it since I installed an aftermarket battery

HHT-Win 64bit XDOS 2023
******

Rate and Thanks then PM to me. I will send password 

Attached Files

HHTWin.txt
File Type:
Downloaded:	56 times
Size:	158 bytes

Help repair dump B200000 "Internal Control Module Memory


Seat Leon 2015
Airbag VW20
3Q0959655AR
SPC5604P

best regards

Attached Files

DFLASCH ORIGINAL ERRO B200000.rar
File Type:
Downloaded:	60 times
Size:	6.59 KB

Hello friends

can someone help me scr off dpf egr 

tested solution


If anyone can help me I would really appreciate it...

thank you all

Attached Files

fiat.txt
File Type:
Downloaded:	47 times
Size:	28 bytes

Hello, I am looking for a diagram of the EHR lift or manual service with diagrams for this tractor.

Hi all. Need orig file Opel Zafira Y20DTH, Bosch EDC15M, HW: 0470504222, SW Upg: 55352864.A5

hello 
i need code radio fiat 500
A2C9827330200014475
SW-Version : 06 05 09 00
HW-Version : F.EU.D2.V22
CAR MAKER PN : 07356608300
S/N : 02428
Supplier : 04677
Date: 28/05/2017
07356608300046770242814817
THANK YOU

BMW F20 2013 I changed the FEM after damaging his. I took one in demolition I made it virgin and I virginized also ELV I coded everything now the machine starts and there is no light on opens and closes but the machine starts only if I put the key in the antenna area. I also programmed a second new key but and the same thing someone can help me thanks

Hi, can someone help me with an immo off tested solution on chevrolet cruze SIMETEC 76.1 25181280
i read the AM29F800BB with vvdi prog thanks a lot

Attached Files

cruze 76.1_AM29F800BB.rar
File Type:
Downloaded:	44 times
Size:	287.26 KB

Hello.


please help mercedes w204 2.2 2007 delphi CRD.11 OM646 EVO egr off.

https://mega.nz/file/AWJUWAzQ#FJiZjYLh3Y...TgNKe6mT0c


thanks.

hello i search solution for scr off caterpilard th 357d adem5 a2c7325330900 a5e12n06887667 with  cat et

I have genuine cat e.t and genuine files . thanks

Guys this is a very useful program for some control unit where your tool does not calculate the checksum type Abrites. tested many times 
thk+rep=pass

Attached Files

cheksum TooL.rar
File Type:
Downloaded:	247 times
Size:	155 bytes

Can someone please help me with a working P-flash for this BCM for the European market 2m25j Cayenne 433MHz I found one but it gives me steering lock error thank you very much

BMW Road Map North America PREMIUM 2023-1

Compatibility:
E60, E61 11.2008 – 05.2010
E63, E64 11.2008 – 07.2010
E70 10.2009 – 06.2013
E71 05.2008 – 07.2014
E81, E82, E87, E88 09.2008 – 03.2014
E84 from 10.2009
E89 from 04.2009
E90, E91, E92, E93 09.2008 – 10.2013
F04 11.2008 – 06.2012
F06 03.2012 – 03.2013
F07 10.2009 – 07.2012
F01, F02, F03 11.2008 – 07.2012
F10, F11 03.2010 – 09.2012
F12, F13 12.2010 – 03.2013
F20, F21 09.2011 – 03.2013
F25 11.2010 – 04.2013
F30 02.2012 – 11.2012

Attached Files

BMW Road Map North America PREMIUM.txt
File Type:
Downloaded:	5 times
Size:	41 bytes

Hello, I need some help for correct usage of my VVDI MB Tool 

I have following situation:
I want to upgrade EIS from W203 with 2 working keys (call it EIS ori) to a used one with a newer partno.(because of more coding-options). The used EIS with newer partnumber has one working key(call it EIS newer).

I have VVDI MB Tool with obd-adapters to work on bench.
Please tell mich which is the correct way to "clone" the EIS - maybe without to use of token.
It would be nice to still use the 2 working keys from "EIS ori" on the "EIS newer" if possible.
Also I dont want to do a soldering work for this car.
Tell me if Im wrong or do a fault

Option 1)
Read the "EIS ori" via OBD(or IR?) on car and get the keypassword via password calculation. 
Then insert the key pass in EIS Section and save the EIS file.
Create and save Key Files ?


Plug in "EIS newer" to OBD Bench cable and load the "EIS ori" file and write to it. (maybe renew before ?)
Dont know if this works because different partnumbers 

Or its only needed to read keypass for the "EIS newer" and then learn new BE Keys ?

Or virgin the "EIS newer" and try to do installation via MB StarDiag DAS on car to learn the 2 keys from "EIS ori" ?

Or are there other possibilities with this equipment ?

Thank you very much !
Best regards

Need immo off for Citroen Berlingo
ECU 9646989080
S2000-24
EEPROM: 95080
Tested solution please, because the car is far from me.

Attached Files

95080.rar
File Type:
Downloaded:	42 times
Size:	464 bytes

HELLO

VW GOLF VWZ2Z2Z2G3512722

Hi guys who want Xdecoder 10.3 i can give activation key just write hw id and Thanx +Reputation! #

Send me a Skype message if you post something here, otherwise I don't look every day!!!

SKYPE to: foxie_41


DOWNLOAD:

 https://mega.nz/file/UAdiGDqR#Gl2e6kcrVI...tBN0RhYQtc

Ineed immo off please for Opel Astra H 1,9l

Attached Files

eeprom Opel Astra H.rar
File Type:
Downloaded:	51 times
Size:	927 bytes

I'm messing with an EDC17C64 ECU that I cloned into a donor ECU because the original is water damaged and doesn't work as it should.
 
I read from the original and entered it in the donor ecu to 100% with the Autotuner tool. Installed the ecu in the car and tried to start it but
the immobilizer is active so it doesn't work :-( Is there anyone here who can give a little hint where I should start checking so I can remove this immobilizer?.

The Original ECU is Bosch EDC17C46 HW: H24 / 028216374
The donor ECU is Bosch EDC17C46 HW: H28 / 0281016374 VOLKSWAGEN Passat VII Variant (365), 11-15, 2.0 TDi Diesel 4-Motion Variant 170 hp .2010-.2013 VOLKSWAGEN, VW 3C PASSAT, Engine Code: CFGB Year: 2012.

Hope to get a hint where i need to start look in the code.

Cheers all